# Installing TOPODRONE laser scanner on DJI M200

To install the TOPODRONE laser scanner on your DJI M200, you will need the following components included in the package:

1. TOPODRONE laser scanner;
2. Mounting bracket and mating part;
3. A set of mounting screws;
4. Alcohol wipe;
5. Power adapter and Helix antenna.

<table border="1" id="bkmrk-%D0%A8%D0%B0%D0%B3-1.-%D0%9F%D1%80%D0%B8-%D0%BF%D0%BE%D0%BC%D0%BE%D1%89%D0%B8-%D0%BE%D1%82" style="border-collapse: collapse; width: 100%; height: 1036.19px; border-width: 0px;"><colgroup><col style="width: 33.3333%;"></col><col style="width: 33.3333%;"></col><col style="width: 33.3333%;"></col></colgroup><tbody><tr style="height: 329.875px;"><td class="align-center" style="height: 329.875px; border-width: 0px;">![](https://knowledge.topodrone.com/uploads/images/gallery/2024-08/embedded-image-qbef2p4h.png)

**Step 1**: Using a Hex 1.5 screwdriver, remove the 2 screws on the bottom of the DJI M200 drone.

</td><td class="align-center" style="height: 329.875px; border-width: 0px;">![](https://knowledge.topodrone.com/uploads/images/gallery/2024-08/embedded-image-apbheefq.png)

**Step 2:** Wipe the sides of the DJI M200 with an alcohol wipe.

</td><td class="align-center" style="height: 329.875px; border-width: 0px;">![](https://knowledge.topodrone.com/uploads/images/gallery/2024-08/embedded-image-gliwsf31.png)

**Step 3**: Peel off the protective films of the 3M adhesive tape and install the TOPODRONE laser scanner's U-mount.

</td></tr><tr style="height: 346.672px;"><td class="align-center" style="height: 346.672px; border-width: 0px;">![](https://knowledge.topodrone.com/uploads/images/gallery/2024-08/embedded-image-vyj0a1ka.png)

**Step 4**: Screw in the 2 M2x6 screws included in the kit using a Hex 1.5 screwdriver

</td><td class="align-center" style="height: 346.672px; border-width: 0px;">![](https://knowledge.topodrone.com/uploads/images/gallery/2024-08/embedded-image-hzwjto1x.png)

**Step 5**: Firmly press the U-mount on both sides where the double-sided 3M tape is attached.

</td><td class="align-center" style="height: 346.672px; border-width: 0px;">![](https://knowledge.topodrone.com/uploads/images/gallery/2024-08/embedded-image-q4b7kout.png)

**Step 6**. Screw the 4 screws of the M3x10 mount mating part tightly onto the TOPODRONE laser scanner using a HEX 2 screwdriver.

</td></tr><tr style="height: 329.844px;"><td class="align-center" style="height: 329.844px; border-width: 0px;">![](https://knowledge.topodrone.com/uploads/images/gallery/2024-08/embedded-image-q7ncnj0q.png)

**Step 7**: Place the TOPODRONE laser scanner on the U-mount as shown in the photo.

</td><td class="align-center" style="height: 329.844px; border-width: 0px;">![](https://knowledge.topodrone.com/uploads/images/gallery/2024-08/embedded-image-idmlao7o.png)

**Step 8**: Fasten the TOPODRONE laser scanner with the screws as shown in the photo.

</td><td class="align-center" style="height: 329.844px; border-width: 0px;">![](https://knowledge.topodrone.com/uploads/images/gallery/2024-08/embedded-image-260ghrws.png)

**Step 9**: Plug the TOPODRONE laser scanner's power adapter into the Sky-Port connector.

</td></tr><tr style="height: 29.7969px;"><td class="align-center" style="height: 29.7969px; border-width: 0px;">![](https://knowledge.topodrone.com/uploads/images/gallery/2024-08/embedded-image-kfqx61fg.png)

**Step 10**. Connect the Lemo 4 pin power cable to the TOPODRONE LiDAR.

</td><td class="align-center" style="height: 29.7969px; border-width: 0px;">![](https://knowledge.topodrone.com/uploads/images/gallery/2024-08/embedded-image-ycg4rgqn.png)

**Step 11**. Connect the antenna connector to the TOPODRONE LiDAR.

</td><td class="align-center" style="height: 29.7969px; border-width: 0px;">![](https://knowledge.topodrone.com/uploads/images/gallery/2024-08/embedded-image-mqnzuu1q.png)

**Step 12**. Screw the Helix antenna on tightly.

</td></tr></tbody></table>