Downloading data from TOPODRONE LiDAR

TOPODRONE 100 / 100+ / 200+ laser scanners are equipped with two ways to record data during ALS or MLS: to a MicroSD card or to the internal built-in memory. If a memory card is inserted in the TOPODRONE laser scanner, the data will be written to the memory card by default. In case the memory card is not inserted, there is not enough free space on it or it cannot be read, the TOPODRONE laser scanner will start writing data to the internal memory.

Data is written to the memory card if there is at least 6GB of free space on the memory card at the time of initialization. If the memory card initially had less than 6GB of free space or it was not available, the data recording starts by default to the internal memory of TOPODRONE LiDAR. 

In order to access the ALS or MLS data of TOPODRONE LiDAR recorded on the memory card, it is enough to power off the device, wait until the LED goes out and then remove the MicroSD card. Connect the memory card to the PC directly or, if necessary, via a card reader.
In order to access the ALS or MLS data of TOPODRONE LiDAR, recorded in the internal memory, it is necessary to download them to an external USB drive, using the included USB OTG Type-C adapter.