Image Settings for TOPODRONE P24

For more information on adjusting your image settings, check out our Telegram channel at the links below:

https://t.me/topodrone/876

https://t.me/topodrone/912

https://t.me/topodrone/923

Connecting the camera to the Internet

TheTo output TOPODRONE P24 to the Internet, the following components and conditions will be requiredrequired:

to

perform the procedure to output the TOPODRONE P24 to the Internet to perform diagnostics:
1.    
1. Mobile device (smartphone or tablet) running Android OS (only Samsung, Honor, Xiaomi phones are tested, other manufacturers' mobile devices from other manufacturers may not work correctly).
   2.
2. 3G/4G/5G mobile internet or Wi-Fi network with internet connection
   3.
3. USB Type-C –to Type-C cable for connection to a mobile device (supplied with the smartphone/tablet)
   4.
4. TOPODRONE P24
   
   

1.

1. Install the TOPODRONE P24 according to yourthe delivery set
   

2.    
2. Power up the TOPODRONE P24 by connecting it to the drone (via SHLD port)port, or from power bankpowerbank or power supplysupply. unit
   
(via USB Type-C 2 port)
3.    
3. Wait for the camera to turn on and boot up.
   

4.    
4. Connect the USB Type-C cable to a mobile device (smartphone or tablet) running Android OS and TOPODORNE P24the USB Type-C 1 port on the TOPODORNE P24.
   5.
5. Make sure yourthat the mobile device has an active Internetinternet connection via 3G/4G/5G or Wi-Fi.
   6.
In
6. On (1) mobile device, go to menu: settings / connections / mobile hotspot and modem / USB modem mode.
   7.
7. TOPODRONE P24 is displayed on the Internet.