Disclaimer
Warning
It's important
Tips and advice
Background information
Warning
The TOPODRONE DJI AIR 2 SPK UPGRADE KIT is a high-precision surveying instrument. We strongly recommend that you handle geodetic equipment carefully to increase its service life.
DO NOT operate the TOPODRONE DJI AIR 2 SPK UPGRADE KIT in any manner not specified or described in this User Manual.
DO NOT expose the TOPODRONE DJI AIR 2S PPK UPGRADE KIT to shock or vibration, especially when the device is turned on.
DO NOT place the TOPODRONE DJI AIR 2S PPK UPGRADE KIT in direct sunlight, in areas with poor ventilation, or near a source of heat or cold.
DO NOT expose the TOPODRONE DJI AIR 2S PPK UPGRADE KIT to moisture, heavy rain, snow, sand, and dust.
Structurally, the TOPODRONE DJI AIR 2S PPK UPGRADE KIT does not have protection against moisture and dust, so using the equipment in a humid (above 90%) and dusty environment may cause it to malfunction, deteriorate its performance, or start corrosion processes, with the possibility of the device failing.
DO NOT insert foreign objects into the memory card, LEMO 6-Pin, or external GNSS antenna connectors, or install the memory card upside down, or attempt to plug non-compatible connectors into the LEMO 6-Pin or antenna connector.
DO NOT insert or remove the MicroSD card while the TOPODRONE DJI AIR 2S PPK UPGRADE KIT is in operation, as this may cause the card to malfunction and/or result in data loss. To safely remove the MicroSD card, turn off the unit's power and wait for the unit to turn off.
When TOPODRONE DJI AIR 2S PPK UPGRADE KIT is not in use, it is recommended to store the device indoors, under conditions of relative humidity not exceeding 40% and temperature 20±5°C. to open the outer cover
If moisture gets on the TOPODRONE DJI AIR 2S PPK UPGRADE KIT during operation, wipe it with a clean, dry paper or microfiber cloth. Then leave it in a dry room for an hour until it is completely dry. After that, remove the TOPODRONE DJI AIR 2S PPK UPGRADE KIT to a storage or transportation location.
The TOPODRONE DJI AIR 2S PPK UPGRADE KIT works on PPK technology, a stable GNSS signal is required during operation with the base station.
In case of intentional or accidental violation of any of the above requirements, the manufacturer does not warrant the performance of the TOPODRONE DJI AIR 2S PPK UPGRADE KIT