Recently Updated Pages
FAQ
Why TOPODRONE UAV PPK UPGRADE Kit does not initialise? The UAV may be in a location with poor GN...
TOPODRONE UAV PPK UPGRADE Kit Technical Specifications
Supported GNSS Systems & Frequencies GPS: L1C/A, L2C; GLONASS: L1OF, L2OF; GALILEO: E1...
Connection Diagram and External Pulse Characteristics
For connection convenience, a LEMO 6-PIN connector is used. The pinout and description of the...
External GNSS Antenna Offsets
During post-processing to obtain a high-precision trajectory of the aircraft, the GNSS antenna ph...
Product Specifications
Product Description The TOPODRONE UAV PPK UPGRADE Kit is a versatile geodetic GNSS receiver deve...
Disclaimer
The TOPODRONE UAV PPK UPGRADE Kit receivers are high-precision geodetic measuring instruments. Wh...
Release Notes
Software Operation Conditions After Technical Support Expiration The operation of the TOPODRONE ...
Calculating the focal length
This tool is not directly related to GNSS data processing, but it helps to calculate the focal le...
Satellite filtering
This module allows you to exclude certain satellite constellations or specific satellites from th...
RINEX merger
This function is designed to merge measurement files received from different receivers of the glo...
GNSS data converter
The module is based on the open source software RTKLIB, this module is designed to convert raw ob...
Maps
The "Maps" module is designed to display loaded static observations and vectors at all stages of ...
Coordinate Converter(Coordinates from file)
The tool allows you to convert coordinates from one coordinate system to another using the *.prj ...
Coordinate converter(One coordinate)
This tool allows to convert data from WGS-84 coordinate system to another one using *.prj file of...
Trim IMR
To eliminate jumps in inertial navigation unit (IMU) data when performing work without satellite ...
Trim IMR (+GNSS)
You can use the IMR(+GNSS) Trim IMR(+GNSS) tool to eliminate jumps in inertial navigation system ...
LAS/LAZ Insta 360 Coloring
This module is designed for automatically assigning color characteristics to a Mobile Laser Scann...
Ground classification
The Ground Classification tool allows you to divide the point cloud into two components: terrain ...
Merge track files
The module is designed for trajectory stitching followed by point cloud generation in the LiDAR C...
Track trimming
This tool is designed to trim a trajectory file in *.pos and *.poses format.To start the tool, se...