Advanced Search
Search Results
40 total results found
Attention
TOPODRONE P61 is a photogrammetric camera designed for surveying terrain objects. Processing of the obtained data is performed in any photogrammetric software. Geodetic receiver TOPODRONE UAV PPK UPGRADE Kit, allows you to obtain high-precision coordinates of...
Product parameters
Photogrammetric camera TOPODRONE P61 is equipped with a full-frame CMOS sensor with a global mechanical shutter and the ability to change lenses. This camera can be mounted on a 3-axis suspension or together with one of the TOPODRONE laser scanners. ...
Photogrammetric camera TOPODRONE P61 installation
Installing TOPODRONE P61 on DJI drone TOPODRONE P61 can be installed on DJI Matrice 300/350 RTK drone. To install the TOPODRONE P61 on a drone, install the GNSS antenna and GNSS receiver on the drone body, connect the antenna cable to the receiver, connect...
Requirements and operating conditions
TOPODRONE Р61 is designed for use in open areas in weather without precipitation. Do not operate the TOPODRONE Р61 in rain, snow, sleet, hail or fog. TOPODRONE Р61 does not have IP protection, and if this recommendation is violated, moisture may get on the ...
Setting the shooting options
Setting shooting parameters All camera parameters are required for correct calculation of longitudinal and transverse overlap between images during mission planning and en-route imaging. The focal length value may vary depending on the lens used. ...
Frequently Asked Questions
What should I do if my camera does not show up as a payload in the DJI Pilot 2 app? What should I do if my camera does not show up as a payload in the DJI Pilot 2 app?Disconnect the camera power by unplugging the X-Port from the Skyport connector, reboot the ...
Turning on and initializing TOPODRONE P61 and GNSS receiver
After successful installation of TOPODRONE P61, place the drone on a flat, hard, stable surface. High grass, sandy beaches, metal structures (such as car hoods or ship decks), slush, and puddles are unsuitable for takeoff. There is a high probability of interf...
Adjusting the camera image
To obtain quality images, you must adjust the camera image. In case of incorrect settings, images from TOPODRONE P61 camera may be unsuitable for further photogrammetric post-processing. The final parameters are always individual, as they depend on the curren...
Memory card: recommendations, installation, data uploading
TOPODRONE P61 uses SD XC-II memory cards as the internal storage medium. Due to the high resolution of images and the high frequency of photography, it is recommended to use only SD XC-II format memory cards. A distinctive feature of the SD XC-II format is the...
Disclaimer
Designations Warning It's important Tips and advice Background information Warning TOPODRONE P24 is a photogrammetric camera designed for surveying of terrain objects with subsequent processing of materials in any photogrammetric software. TOPODR...
Product parameters
Photogrammetric camera TOPODRONE P24 is equipped with APS-C format sensor with global mechanical shutter and possibility to change lenses. This camera can be mounted on a 3-axis gimbal or together with one of the TOPODRONE laser scanners (depending on the deli...
TOPODRONE P24 Specification
Camera type Mirrorless with interchangeable optics Bayonet type Sony E Image stabilisation Absent Number of megapixels 24 Matrix size APS-C (23.5 x 15.6 mm) Maximum photo size, pixels 6000 x 4000 Matrix type CMOS ...
TOPODRONE UAV PPK Upgrade Kit Specifications
TOPODRONE UAV PPK Upgrade Kit is a small GNSS receiver with the ability to connect an external GNSS antenna and integrate with various payloads.TOPODRONE PPK UAV KIT Specifications Supported GNSS systems and frequencies GPS: L1C/A, L2C; GLONASS: L1OF, ...
Wi-Fi connection and setting adjusting
To connect to the TOPODRONE P24 via the web interface, the following is required: 1. TOPODRONE P24 itself with external power supply connected (VIA SHLD port or USB Type-C 2 port) 2. Any mobile device with Wi-Fi module and web browser (mobile phone...
Main Tab
This tab displays the current camera settings and video stream. [S] MF ISO400 1/30 N/A 0.0 microSD[1696] ZOOM 0% Operating mode Available values: [S] Shutter priority [M] Manual [A] Aperture pr...
Settings Tab
This tab allows you to change camera settings, described on previous step Also, the following settings are also available on the settings page: WB - White Balance (White Balance Scenario) Available values: Auto/Daylight/Shade/Cloudy JPEG Qual...
Image Settings for TOPODRONE P24
For more information on adjusting your image settings, check out our Telegram channel at the links below: Best Camera Settings. Introduction. Part 1 of 3. Best Camera Settings. Semi-automatic and manual shooting modes. Part 2 of 3. Best Camera Settings. Tip...
TOPODRONE PPK Upgrade operation guide
TOPODRONE PPK upgrade is a compact GNSS receiver based on the uBlox chip, integrated with the camera shutter. TOPODRONE PPK is installed in front of the drone, inside a plastic case, it has four holes for the front visual positioning system cameras.The TOPODRO...
Description of the TOPODRONE DJI AIR 2S PPK
Preliminary preparation and verification of the drone Before you start using the TOPODRONE DJI Air 2S PPK, it is strongly recommended to read the instructions for the DJI Air 2S drone. It is available on the official website at the link. This instruction and ...
Route Planning for TOPODRONE DJI Air 2S PPK
Initially, the DJI Air 2S PPK drone does not have the function of flying along the route in automatic mode. However, with the help of third-party software, flight along the route for the AFS is possible using the technology of "virtual sticks". With this techn...