Search Results

Before starting each route for ALS or MLS on the TOPODRONE LiDAR, a calibration pattern must be performed after the initialization procedure. This pattern is performed to calibrate the IMU module inside the TOPODRONE LiDAR. Without performing this calibration ...

During the flight, TOPODRONE LiDAR scans an area of the surface of a certain width, which is called a "scan". The width of the scan is determined by the technical characteristics of the sensor, the operating altitude of the flight, as well as the difference in...

The following components and tools are required for installation: Version 1, powered by SkyPort connector TOPODRONE LiDAR Mounting pad with dampers Dovetail mount A set of mounting screws M3x6 A set of mounting screws M4x10 A set of mounting...

This module is designed for processing data obtained using the TOPODRONE AQUAMAPPER bathymetric scanner. To process the data, follow these steps:: Launch the TOPODRONE Post Processing program and go to the AQUAMAPPER tab. Select the .nmea file that you...

Select the "AQUAMAPPER" tab to configure the processing parameters of AQUAMAPPER modules. If necessary, adjust the Roll and Pitch angles. Closer to zero values of these angles will help to increase the share of vertical measurements in the processing proces...

Program Initialization: When you start the software, the bootloader window opens, where the user can start the installation and activation process. Entering the license key: If you have a valid license key, you must enter it in the designated field marked "...

The Ground Classification tool allows you to divide the point cloud into two components: terrain related points and all other points. This method is based on a simplified physical process. Imagine a piece of cloth suspended above the terrain, which then falls ...

During GNSS data processing, it is essential to monitor satellite availability, their spatial distribution, and the quality of received signals. Specialized visualization tools are used for this purpose, each providing data for analysis. The Sat Vis (Satell...

Software Operation Conditions After Technical Support Expiration The operation of the TOPODRONE Post Processing distributor depends on the current technical support status. If the paid support period expires before the release date of a new software version, ...

This module is designed for automatically assigning color characteristics to a Mobile Laser Scanning (MLS) point cloud, coloring it with natural colors using data obtained from TOPODRONE scanning systems. Operating Principle and Data Requirements: To obtain ...