TOPODRONE 100/100+/200+
Disclaimer
TOPODRONE LiDAR 100/100+/200+ - are high-accuarate surveying measuring instruments that require c...
TOPODRONE LiDAR design and overview
TOPODRONE LiDAR 100/100+/200+ is a multifunctional device designed for airborne and mobile laser ...
Supply package
1 TOPODRONE LiDAR 2 Protective cover for the laser scanner lens 3 Quick-rel...
Requirements and operating conditions
TOPODRONE LiDAR are designed for use in weather without precipitation. Operation in rain, snow, f...
Technical specifications
200+ 100+ 100 Sensor Type: XT32M2X XT32 XT16 Laser Sensor Drive Type: M...
Setting up the laser sensor
When using TOPODRONE LiDAR for ALS, the laser sensor Field-of-view angles are limited to 106 degr...
TOPODRONE LiDAR to backpack installation
To install the TOPODRONE LiDAR on the backpack, you need the following components included in t...
TOPODRONE LiDAR to mobile mount installation
To install the TOPODRONE LiDAR on the mobile mount, you will need the following components includ...
Installing TOPODRONE LiDAR on DJI Matrice 300 / M350
The following components and tools are required for installation: Version 1, powered by ...
Switching on and initializing the TOPODRONE LiDAR
After correct installation on the drone or backpack, connection of external GNSS antenna and powe...
Overlaps between scans and the height of the scanned objects
During the flight, TOPODRONE LiDAR scans an area of the surface of a certain width, which is call...
IMU calibration pattern
Before starting each route for ALS or MLS on the TOPODRONE LiDAR, a calibration pattern must be p...
Airborne Laser Scanning (ALS)
The TOPODRONE LiDAR is designed to perform airborne laser scanning (ALS). To perform this procedu...
Mobile Laser Scanning (MLS)
The TOPODRONE LiDAR is designed to perform mobile laser scanning (MLS). This process requires a m...
Downloading data from TOPODRONE LiDAR
TOPODRONE 100 / 100+ / 200+ LIDARs are equipped with two ways to record data during ALS or MLS: t...
Ground Control Points (GCP) for TOPODRONE LiDAR
To assess the accuracy of the final dense point cloud after data post-processing, it is necessary...
Frequently Asked Questions
Question: what happens if I run out of free space on the memory card while recording data (AL...